Connecting a Bathroom TV to external ceiling speakers

Connecting a Bathroom TV to external ceiling speakers

ProofVision Bathroom TVs can be connected to external speakers/audio systems using the 3.5mm auxiliary audio out port on the TV.

Once the 3.5mm jack is connected into the TV, this will route the sound from the built-in speakers on the TV to the external speakers, either a 3.5mm or RCA connection. This is not an amplified connection so this will need to plug in to active speakers or an external amplifier with passive speakers to play sound.

NOTE: We recommend that a ground loop isolator is installed at the TVs 3.5mm jack to limit any potential interference. 




    • Related Articles

    • Premium Bathroom TV - Connecting to the internet

      There are 2 methods of connecting to the internet to access the smart features: 1. Wi-Fi The small antenna on the back of the TV is what picks up the Wi-Fi signal. Because the TV is built in to the wall, it is important customers understand that ...
    • Can i wall mount my Bathroom TV?

      ProofVision Bathroom TVs cannot be mounted on top of an existing wall, they are only designed to be embedded within a recess in the all.  Neither the TV or back-box have necessary VESA holes to attach a wall bracket.  Mounting a TV on top of the wall ...
    • Can i extend the power cable length for my bathroom TV?

      There are two options for extending the power on your bathroom TV: Up to 2M extension (19"-27" only) DC extension lead is available for 19inch-27inch. This goes in-between the transformer and TV. We recommend that a DC extension is no longer than 2M ...
    • Screen flickering on bathroom TV

      If the screen is flickering on your bathroom TV, it is because it is not receiving the necessary voltage to power the screen. This will be likely caused by use of an extension lead which is too long. Further advice on this can be found here ...
    • Bathroom smart TV - Wi-Fi not connecting

      If you are trying to setup the Wi-Fi connection on your smart TV and receive an error message or very weak signal, please follow the below steps to resolve. Check the antenna for Wi-Fi is securely screwed on Bathroom TVs are supplied with a screw-on ...