Screen flickering on bathroom TV

Screen flickering on bathroom TV

If the screen is flickering on your bathroom TV, it is because it is not receiving the necessary voltage to power the screen.

This will be likely caused by use of an extension lead which is too long. Further advice on this can be found here https://proofvision.zohodesk.eu/portal/en/kb/articles/can-i-extend-the-power-cable-length-for-my-bathroom-tv
Either a shorter extension cable (under 2m) or longer 240v IEC cable will be required. 

If there is no DC extension lead in place, please contact our Technical department on 0203 4111 693 (opt 3) or technical@proofvision.co.uk for further assistance or consult your electrician/installer. 

    • Related Articles

    • Bathroom TV LCD faults

      ProofVision bathroom TVs use LCD technology and can be subject to one of the following defects: Pixel issues (lines across screen, clusters of 3 or more light/dark pixels) Shadowing Both of the above cannot be resolved by troubleshooting but are ...

    • What makes a ProofVision bathroom TV suitable for a bathroom?

      There are several aspects which make a ProofVision bathroom TV suitable for a bathroom. Waterproof ProofVision bathroom TVs are deigned to be a fully sealed unit with no entry point for water or moisture. They are tested and certified to an IP65 ...

    • Can i extend the power cable length for my bathroom TV?

      There are two options for extending the power on your bathroom TV: Up to 2M extension (19"-27" only) DC extension lead is available for 19inch-27inch. This goes in-between the transformer and TV. We recommend that a DC extension is no longer than 2M ...

    • Can i wall mount my Bathroom TV?

      ProofVision Bathroom TVs cannot be mounted on top of an existing wall, they are only designed to be embedded within a recess in the all.  Neither the TV or back-box have necessary VESA holes to attach a wall bracket.  Mounting a TV on top of the wall ...

    • Bathroom TV turns from red to green but no picture

      If your bathroom TV's indicator light on the front turns from red to green but then no picture appears on the screen, then it is likely not receiving necessary power. Below are the steps in our troubleshoot programme to resolve the issue. Check ...